Friday 5 October 2012

Are cheap chinese carbon frames worth the gamble?

Just don't tell Darth about the bits Malone did
After four years and more than twenty thousand miles of cycling, I have decided to retire my trusty Trek 1.7. It has served me well, and will continue to trundle me through Warwickshire when the weather is sufficiently crap. But for sunnier and grander occasions, I want a bike that rides like it's just stolen something (lawsuit pending from Lance's soundbite department ... hopefully he's too busy).



I've spoken to a number of cyclists over the years who wax lyrical about their bike collections. When I started riding, the thought of having more than one bike seemed overly extravagent. But after seeing the pride of my fleet (of one) take on the british weather, all year round, I started to think seriously about getting another bike.

Ultegra groupset. Schwalbe Ultremo tyres. Intrepid wheels. What could go wrong?

Eventually I got a Charge Plug (fixie) for riding to work. It helped the Trek keep her looks for another year or two. But after another couple of harsh winters, she was starting to really show her age.

And my eye started to wander. Our long-distance relationship has been kinder to me than her. With each passing mile I tone up whilst she gets a bit .... looser in places, creakier and crankier. The demands for replacement parts is steady and continuous. But however I try to stem the ageing process, there's no escaping the fact my beautiful Trek has seen better days.

My Trek's better days included modelling

After long consideration I decided to go for a "cheap chinese carbon frame" (CCCF for short). My reasons were simple enough. I don't have enough money to go out and purchase a brand new, Ultegra-equipped, branded carbon bike. I also had enough contacts to facilitate the building of a bike. I know a bit about building bits of bikes, and Steve Malone (aka "The Terminator" from previous articles) knows the rest.

As luck would have it, and this is the main reason I went ahead with the purchase, Steve had already bought and built up his own CCCF. I hadn't seen it, but he was happy with it and had ridden 800 miles without any structural issues. These were powerful words of reassurance as internet forums are dotted with plackard-bearing doomsayers citing 3rd party stories of broken bikes and maimed riders. I wasn't really concerned about these negative forum comments as none appeared to have evidence of an actual bike actually breaking. Steve on the other hand owns a CCCF and is a happy customer.

Steve is currently not in tip-top shape and at the time I emailed him was unable to move. However, he did reply with the following.


"Hello Mate,

I am unable to move at present but Mrs M has perched the laptop on my chest so I can have a look though the web for some bits for you.

My frame only goes to a 58 maximum. The larger sizes are here

http://www.ebay.co.uk/itm/12k-Full-Carbon-Racing-Bike-Frame-Front-Fork-58cm-1-/310376208302?pt=UK_sportsleisure_cycling_bikeparts_SR&hash=item4843dd17ae

or here: http://outdoor-bicycle.en.alibaba.com/productgrouplist-211905475/Carbon_road_racing_frame.html#products

or here: http://flyxii.com/products_1.asp?menuid=308&id=479

They had to mould my 58 by request but once they have the mould they keep on selling the size so it does not cost more. You can try mine for size? They will prob make you a 60.

Best way to spec is open these all up and compare the prices in baskets:

http://www.chainreactioncycles.com/

http://www.merlincycles.com/?fn=category&categoryId=76&page=2

http://www.planet-x-bikes.co.uk/

http://www.ribblecycles.co.uk/

http://www.bike-discount.de/shop/a15983/racing-5-black.html?lg=en

Don't forget the little things like barrel adjusters etc... You will need in-line cable adjusters for internal cables. I have a lot of that sort of stuff here so can sell it to you cheaper than these dudes.

Campag lasts longest and you can replace small parts cheaply instead of entire units. Hoods are meant to be best, I don't like thumb shift, make sure you get campy wheels or compatible hub.

Shimano is heaviest but takes least maintenance. Fairly reliable, easy to get parts and interchanges with most other brands. Sram is lightest and cheapest but takes most fettling to keep it sweet and wears out in shitty weather. Sram do make best cranks and the BB's last longer than Shimano. Shimano and sram mix except for rear mechs and shifters, campy is exclusive. Don't rule out Microshift as up and coming, their top end stuff is strong and light, works with Shimano.

wheel guys: http://cycletaiwan.com/

http://www.cycledivision.co.uk/product-info.php?pid23.html"



As usual, the information he provided set me some tracks upon which to travel. The issue with 58cm or 60cm had been rattling around in my head from the moment I decided to buy another bike. My Trek is 60cm and I am 6'2" in old money. After years on the Trek I was coming round to the idea of a smaller frame as I felt I could fit on one. That's as scientific as it got. Naturally I wanted to ride the smallest frame possible to shave grams off the overall weight. It's easier to do that than eat less pies.

I decided on a Flyxii frame with a large headtube in 58cm. I did ask Flyxii to build a 60cm frame but they clearly don't see a market for that frame size. So if you're particularly larger than me, expect to pay for the custom build, if they consider it worthwhile going any bigger than 58cm.

I placed the order and on a whim ordered some very shiny one-piece carbon handlebars for around £80. I checked with Flyxii and they promised that they would send a headset free with the frame. They also confirmed that the seat post clamp doesn't come with the bike and would need adding to the order. I added it to the order and sat at the living room window, waiting.

Ten days later the box arrived from China looking undamaged and remarkably compact. Looking at it I was dubious that it contained a frame, fork and handlebars. Not only did it look too thin, It felt empty.

I opened each seal meticulously, cutting through the tape with a steady hand. Peeling the lid open as cautiously as Indiana Jones examining booby-trapped treasure, I found the contents were indeed all present and very carbon (click here for the painstaking process)


"Chinarello" frame and forks

My first impression of the frame was mixed. Lifting it out of the box I was immediately impressed by the weightlessness of the components. The giveaway sign is a too-rapid lifting of the arm. All my family did the same, lifting it up faster than they expected to, followed by widened eyes and gasps of appreciation.

The second impression was that the frame was visibly cross-hatched with trademark "carbon" patterning. I didn't expect this as I had paid an extra 20 dollars to have the frame painted matte-black. I had expected a solid dusty black colour without the criss-cross markings. However, I spoke with Steve about this later and he confirmed that this is how matte-black looks on Flyxii carbon. I still prefer it over the glossy look.

The last thing I noticed, and it struck me hard as I wasn't expecting it, was the uneven layering of the "raw" carbon. Whilst the finish was smooth, and from three metres away the frame looks flawless, on closer inspection it looks patched. I guess it was my lack of knowledge about the formative process behind carbon frames which left me feeling a bit let-down. Having thought about it, I imagine all carbon frames look like this before they're liveried up with glossy paint-jobs.

The finish is distinctly patchy where the layering process mismatches the minute cross-hatching. That said, if you don't want this effect, then go for a glossy finish. Retrospectively, I would still order matte, it looks so "stealth".

And so I set about pretending to build the bike. Steve wasn't available for a few days due to not being able to move very well and getting married. But my other items, such as a complete Ultegra groupset (lurking in a big box) were sat in the back room waiting to be opened.

Now, I haven't built a complete bike before and at this juncture I can only stress that you need someone to help you if you haven't either. It's all well and good starting the build, but finishing it will require more skill and finesse than high hopes and good intentions can provide.

But as no one shouted "STOP YOU IDIOT!!!!!!!" I felt obliged to start trying to build the entire bike. And so the first thing I absolutely needed to do was go to my local bike shop, Mike Vaughan Cycles. The reason for this emergency visit was my lack of tool (or suitable household item) for knocking the first bearing onto the fork.

I wasn't to know this, but the bearing that sits on the fork, doesn't sit there. It is hammered in, quite brutally (considering what we are dealing with) using a long tube that sits over the steerer tube and onto the bearing. This allows for the application of even amounts of pressure, forcing the bearing to sit snugly on the fork. You cannot push the bearing on with your hand, I tried. How you get one off I may never know.

I went into Mikes shop and spoke with Brian. I did find when unboxing the frame that spacers don't come with it. So I asked for spacers and also asked if "ahem" they had a tool for knocking bearings onto forks. Brian popped out back with the fork, handed it to a mechanic. Three violent clangs later he emerged with the fork, bearing mounted proudly on the steerer tube.

I examined his selection of spacers and came away with three matching carbon fibre ones, adding up to more than ten quid. I returned home with all the items I would need to build the headset. Having googled this a bit, I also knew that the steerer tube would need to be measured for correct height before I would cut it, perfectly evenly, at the point where the headset would sit. I am pleased to say that having measured the spacers on my trek, and allowing for the smaller frame size, I went into this part of the build with my eyes open.

I know my limitations, and after putting the bearings into the integrated cups both below and above the front of the frame, and sliding the fork into place, I stopped and made a call.

The functional headset comes free with the frame and forks, if you ask for it.
The seatpost clamp however, doesn't come for free. Make sure you order one or have one ready.

Ted is my father-in-law. And whilst emasculating me on a daily basis with feats of DIY brilliance, he is the perfect person for asking to cut a steerer tube "flatly". He came over straight away with a hacksaw and some sandpaper. We measured, allowing 4mm of clearance from the top of the handlebars to the intended height of the steerer tube. This lack of height can appear counter-intuitive, but it allows the headset to pull the bearings upwards, resulting in a smooth and fluid headset.

After measuring twice he cut once. The cut was perfect, and after five minutes of gentle sanding the steerer tube was no longer two inches too long for my bike. After he put the sandpaper down I started breathing again.

Cutting bits off your new bike isn't a comfortable experience. Luckily I had a Ted.

With the wheels provisionally attached and the headset in place, it was beginning to look like a space-age concept bike. It was getting late, but I still had some skills and unused tools at my disposal.


Without tyres,saddle and a groupset the bike is rather .. naked

I dug into the big box of Ultegra yummies and located the bottom bracket. Having borrowed the BB tool from my mate Neil, I slid the lubed-up tubular component into place and prayed it would fit. Remarkably, the screwing action on both sides felt like fitting an airlock. It fit perfectly and tightened up without undue persuasion.

Easy to fit, satisfying to behold. Sofa is photoshopped. I did this in the garage, naturally.


Filled with confidence I set about fitting the handlebars and brake/gear levers. Again, this process was a flawless victory .... right up to the point where I destroyed the carbon handlebars.

And here is my first cautionary tale to the uninitiated reader: Doing stuff yourself for the first time usually results in things breaking. Sometimes it's a handlebar, sometimes it's a condom. What I did wrong, and I'm fairly sure I broke these bars, was I lubed up the steerer tube. Being used to dealing with aluminium bike parts, I thought you lubed everything.

I think the two carbon surfaces were so smooth that the lube created a micro ice-rink between them. As a result the handlebars were never going to clamp on. Furthermore, because both surfaces were carbon, the application of lubrication was really irrelevant; neither surface will ever corrode so a protective coating is pointless.

Dear God what have I done!


After about an hour of staring blankly/disbelievingly/forlornly/dispairingly/angrily/sadly (it was a long hour) at the two bolt craters I had created from over-tightening, I took the bars off and set about disassembling my Trek. Leaving it barless, levers hanging limp over the front wheel I returned to my creation like an agitated Frankenstein.

Some may say that the destruction of that bar tape was an act of kindness. But it's Lizard Skin and it felt great.

Familiar with my old bars, this time they held firmly and the bike started taking shape. Out came the front and back brakes. Out came the allen key. I must say that they weren't difficult to screw on. Calibrating them however isn't such a walk in the park. The rear derailleur was fantastically easy to screw on but then came the front derailleur.

This was my moment of terror. Allen key in hand, derraileur in the other, I moved in on the frame... Only to find I needed a clamp. Ultegra doesnt provide the clamp in its groupset as some frames are already fitted with an integrated fixing point. Another trip to Mike Vaughan's later I returned with an "M-Part Components" clamp, which conveniently matches the same branded spacers.


Around this point, with wires dangling, I realised I'd used up my limited abilities. Time to visit Steve.

Having crushed my handlebars I wasn't in a mood for more wanton destruction. In fact I got as far as gripping the clamp to the frame to stop it sliding down before I backed off and put everything away.

It's worth noting at this point that the seatpost I had bought for this bike was too small for this frame. I was going on measurements from my Trek, when I should have simply looked at the Flyxii schematic and ordered the corresponding size. Thus began my seatpost debacle which trundles along this entire story practically unnoticed until the end.

Arriving at Steve's the next day I had the opportunity to check out his fully built CCCF. Although the frame is more aggressive in geometry than mine, the two bikes share a lot of similar features. My Intrepid wheels are a deeper rim than his and were purchased mainly because they were on offer from £400 down to £200. His groupset is SRAM and the seatpost elongated for aero goodness. Mine looks definitely more sportive-orientated, which is the kind of bike I wanted. His looks like it was created for racing on weekdays and time-trials at the weekend (with aero bars fitted).


With holes in the frame for Di2, Steve's frame is capable of housing some seriously gucci kit.


For the next few hours I looked on as he went about feeding cables into housings and trimming the gears. It started taking shape very quickly. Being something of a Valhalla for bike bits, he dug out a spare seatpost which fits my frame. He fitted it and measured me against the bike. This was the first time I would find out if 58cm frame would fit me, and the pressure was mounting.

Saddle to pedal, the distance worked out to be a perfect fit!

He showed me a useful way to guage the correct amount of force to use when tightening the front derraileur; using one finger he tightened the allen key until the pressure of the fit stopped the finger from tightening any more. The front derraileur hasn't moved since.

After he'd removed his seatpost I left and put the bike back in the back room (a temporary luxury accomodation) to await the arrival of the Wiggle seatpost. It was wednesday and I was riding the 100mile Stratford Sportive on sunday. I was beginning to worry about delivery. Contacting Wiggle I discovered the item wasn't even in stock! Cancelling the order I switched to ChainReactionCycles and hastily selected a very funky mountain bike Race Face seat post which was on offer at £25 down from £85. I wanted a rock steady seat post and at 16 stone it's probably not such a silly idea to buy Mtb equipment (when it's this light and funky). I chose next day delivery on wednesday night, so expected the delivery to land on friday.

Come friday I sat at the window (again), this time dressed in lycra, helmet on, waiting for the seatpost to arrive. I waited all day and nothing came. Panic was beginning to set in. The next day I was doing a car boot sale with the kids and would be out of the house most of the day. My window of opportunity to test-ride the bike was disappearing.

I got back to the house on saturday afternoon to find the parcel had been delivered next door. A hastily polite conversation later I was in possession of a funky looking box.

Race Face Turbine seatpost. A very fine piece of equipment.
It comes in any colour, as long as it's black.

With committments coming out of my ears, I could only fit the post to make sure it was the right size. It slid in like it grew there. I hopped on and rode it up and down the road a couple of times unable to do any more with it until the 100 mile ride.

The next day I met up with Neil and we made for Stratford. At the Park and Ride, it was clear that this event was now beginning to explode in popularity, riders were all over the place, smearing baby bottom butter into crevices, urinating into bushes, fitting heart rate monitors to hairy chests and tinkering with their machines. We got changed in the car and minutes later were riding our last sportive of 2012.

My first impression of the bike was its rigidity. Every pedal stroke seemed to impart maximum power down the cranks into the wheels. There is no percievable flex and the Schwalbe tires glide over the road surface with minimal resistance. The gentle hum of the aero wheels was the only sound from the bike, which considering this was its first outing, was most fortunate.

As usual I pushed the pace up to the leading group whilst Neil sat behind saving himself for the other 99 miles (his work always seems to come in the last 20 miles). After a couple more miles I noticed a minute clicking noise from the front derailleur and adjusted the setting with my in-line barrel adjuster whilst rolling. The adjustment was too generous and a short time later when changing from small to big ring, my chain popped off the outer ring.

Another 10 miles later whilst waving at a crowd on the roadside, I hit a small bump in the road and heard a horrific cracking noise from the frame. At least that was my perception. After a few more metres I realised the seatpost had slipped down an inch, due to my newly found softly softly approach when tightening stuff. The noise had been the seatpost sliding into the frame.

The skipped chain had left us in no mans land between grounps. But the readjustment of the seatpost resulted in Mike Vaughan's group of cheerful riders passing us. I usually ride with MV, but today I'd arranged to ride with Neil.

We caught up with them and settled into their brisk pace. They had started a few minutes after us so the pace was around the same as our original speed. We travelled another 15 miles drafting each other and calling out potholes etc. The bike was settling in. Cables had stretched and I was now having to change up two gears and then drop it down one to get it whirring smoothly, but I'd expected this at the start.

Around bends I found the bike reliable and rapid. Descents were even more noticeable. Neil said at the end of the ride that where I usually drop back on my Trek, I was whizzing off down downhill with more speed. This is down to confidence in the machine, and confidence arises from stability. The bike is very good at speed.

At the first feed stop Neil was itching to get moving again. He is in the best form of his life and he wanted to show it. We left the Mike Vaughan crew purchasing food and slinked off towards Saintbury hill. Once again between groups I suggested we up the pace until we found somewhere to shelter.

We found a group about 10 miles before Saintbury hill and nestled in. However the pace wasn't really fast enough and by the time we got to Saintbury we were about 20 metres ahead of a group of 10 skinny looking people.

Neil is good on climbs, particularly this year. I'm not so impressive. With a group behind us and Neil to my side I could see me coming out of this climb behind everyone. However, the lightness of the bike and the rigid frame was helping me match Neil's output. The heart rate monitor on the newly purchased Garmin (my first SatNav cycle computer) was beginning to spike.

My theoretical maximum heart rate of 181 turned out to be my maximum heart rate on Saintbury.

As usual, big climbs generate a silence interspersed with panting. Looking back I could see the group were actually falling behind. Neil was within a metre of me and I didn't even feel like I was dying. My heart rate indicated I hadn't got anything extra to give on certain parts of the climb, but it dropped steadily to a respectable 160bpm when the gradient fell off slightly.

That was the penultimate test of this bike. We finished the sportive in a very commendable top 20'ish position. Neil dragged my (relatively) unfit ass around the last 30 miles of the course.



One of the inline barrel adjusters. A feature I particularly like.

The final test had to wait until yesterday, hence the 2 weeks time lapse since the Stratford 100 .... I had to pedal in anger .... And the only way for me to do that properly is to join the Mike Vaughan crew on a tuesday and thursday evening for the bash.

I'd ridden tuesday but nearly crashed on the final sprint. This had happened because my new pedals and old cleats didn't fit each other perfectly. They had been fine for gentler rides, but the sprint finish has me pounding the pedals at maximum effort. Whilst doing about 25 miles an hour at the bottom of a sharp finishing hill, my right foot popped out of the pedal. I wobbled precariously for a moment but kept the bike from crashing.

Yesterday, new cleats fitted, I rode again. This time the 30 miles was much more gentle and I could feel power in my legs as we approached the finish. There are some very good riders in the crew but the two to watch yesterday were Mark and Jack. Both of these riders have destroyed me time and again this year. My lull in training for the first half of the year has left me with a lot of work to do.

The final sprint was typically explosive, with 5 riders hitting the bottom of the sharp climb into Kenilworth at maximum effort. The sprint is up a steep hill and lasts approximatley 100 metres. It's short enough for speeds of 20+mph to be maintained.

As we hit the bottom Mark and Jack scythed past me on both sides. I took the prompt and got my arse out of the saddle and slammed my feet against the pedals. The power transfer was immediate. Acceleration palpable as I caught Jack's wheel and found myself jostling for position up the left side of the road as we rocketed up the hill. Such was the power and the lightness of the bike, my front end kept rising off the floor. This isn't a sensation I'm familiar with on the Trek and I realised that my sprinting position would have to change.

Jack found himself boxed in with Mark in front and me beside him. I crept past young Jack as a result of this and finished the sprint within touching distance of Mark. This is by far the best result all year for me. The bike had passed its final test with flying colours.



Total Cost

Inline Cable Tensioners £7.99
Raceface Turbine Seatpost £24.99
x2 Schwalbe Ultremo ZLX Folding Road Tyre 700 x 23c Black  £60
Lizard Skins Carbon Patches and Chainstay protector £10
Lizard Skins Handlebar Tape £25
Flyxii Frame, Forks, Headset, Seatpost Clamp, Matte Black Paintjob £253
Flyxii Handlebars £72 (not used but included in final tally)
M Components Spacers and Clamp £20
Shimano Ultegra Groupset £552
Intrepid RC38 Alloy Clincher Wheelset £200
Saddle already owned

Total cost of this bike build =  £1225

Total Satisfaction

Total!

In less than five years the "stealth" bike may be too much of a common sight. Already, riding this one out on its first and only 2012 sportive, I saw three other stealthy unmarked black CCCF's which shared a lot of features with my own. The wheels were the only things that really set them apart. When they become "too" common, I shall have to indulge in some dramatic decals, or buy a glossy frame. But not for quite some time....

Stealthy, fast, rigid and rapid acceleration. My perfect machine.

81 comments:

  1. Carbon paste is your friend - surprised your pal hasn't told you about it. Instead of greasing components, when mounting carbon things you use carbon paste - it's basically tiny little plastic balls in a gel, which lock against the components and create a firm grasp. It allows you to not have to tighten bolts as much.

    ReplyDelete
  2. Yer that sounds perfect. I saw it in the shop but at £9 I was reluctant. Now that the £80 handlebars are destroyed, I'm thinking perhaps I should have shelled out ...

    ReplyDelete
  3. Really interesting piece. I have been toying with the idea of buying from Flyxiimyself buy have a minuscule budget. I have found a frame 51cm perfect for me and fork Combo for approx £166. Would you say that this was too much of a risk as the price is so cheap?

    Greg

    ReplyDelete
  4. Thanks for the feedback Greg. Regarding your quandary I would take the "nothing ventured nothing gained" approach. The customer service is more than acceptable with Flyxii, and I would expect the same to be applicable to all the "rated" chinese outlets.

    £166 for a frame and fork isn't that much cheaper than mine ... and mine rocks! I got my old Trek (aluminium frame) working again today and took it for a test ride. The difference between the two bikes is immediately clear. For starters, my 60cm Trek feels like an ocean liner with its generous proportions. It also cruises like a liner. Whereas the 58cm Flyxii feels much more stiff and hits the road like a speedboat hits the ocean. The carbon is built to go very quickly, without loss of wattage through flex. For all its rigidity, I have to say that it hasn't killed me over longer rides. I feel comfortable enough after finishing. The aluminium is definitely more forgiving though.

    I'm glad the Trek has still got a few redeeming features, it will make it more tempting to get out for wet rides over the winter.

    If you scratch around for 2nd hand parts on ebay (I wouldn't compromise on the groupset or frame/forks though) you might be able to pick up some good wheels and cheap components that go towards your final build. I've cobbled some used bits onto this bike (saddle and handlebars) and it still looks as good as new.
    Good luck, it's an interesting journey.

    Rich

    ReplyDelete
    Replies
    1. Thanks for the info. I may contact flyxii and see what they have to offer. You mention a free head set, should I mention this to them, is this standard or was this specifically for your order. I have an existing alu bike that I will be stripping so parts will not be a problem. I will keep an eye on your blog to see how you fair with the stealth bike.

      Greg

      Delete
  5. I would mention the headset to them as it didn't seem they were going to automatically send one. Remember the seatpost size may be larger than your current alu seatpost (which was the case with mine), check the schematic it has the sizing on it.
    Otherwise, good luck! :D

    ReplyDelete
  6. Your saddle setback is definitely outside the spec for the saddle. Probably also for the seat post. You'll be risking saddle rail and seat post clamp failure.

    The Turbine post looks real nice, but You probably should look for a setback seat post.

    ReplyDelete
    Replies
    1. Hi thanks for the comment, I'm going on a bike course tomorrow I'll mention it and get some advice. Why does setback change the wear and tear of the saddle rail?

      Delete
  7. Hi, could you let me know about http://cycletaiwan.com. Are they reliable?

    ReplyDelete
  8. Hi Richard, loved your piece. I'm thinking of taking the plunge myself. Can you tell me, now that you've had the frame a while, if it's holding up OK? Cheers, Kenny

    ReplyDelete
  9. Hi Richard,

    greetings from Spain. I'm thinking in the possibility to buy a Chinese frame since a long time but here in Spain is really complicated not to pay a huge amount as a custom tax. Normally this made the frame double the original price or even more.

    Could you tell me your experience with the UK custom? I have friends living there and maybe it's an option for me.

    Thanks in advance,
    Santi.

    ReplyDelete
    Replies
    1. first i must give you my compliments about the way your writing. I like your still, and enjoyed reading. I bought myself a ``Pinarello Dogma`` from china as well.

      @santi, they put big stickers on the box GIFT. in my case (the netherlands), and a value of $220 on the box (i paid 800 for wheels+frame). So i had to pay 21% of $220. So it was not to much of a problem.

      Delete
    2. That's unthinkable noways in Spain. Many people still try and the thing end up in a nightmare. Here we should pay: the VAT 21% + a duty tax 4,7% + something to the Spanish postal service for the management (no idea how much is) + a tax call antidumping (http://en.wikipedia.org/wiki/Dumping_%28pricing_policy%29) 48%!!.

      All of this is calculated over the declared price. If in the bill appear 220$ but the customs officer think the seller reduce the price to avoid customs tax, he set the price. For example 400$.

      That makes 400$ + 48% antidumping + 4.7% duty = 610$ + 21% VAT = 739$ + postal management = 765$.

      More or less double of the price the customs officer decide. Could be 400$ when the real one is 800$. But could be 600$ when the real price is 400$.

      As you can see, unthinkable from here.

      @Anonymous. By the way, thats the frame i want, a dogma 2 replica and maybe with the wheels. From which shop did you buy? Any problems?

      Conclusion I need a friend in the Netherlands :-)

      Delete
    3. Dear Santiago.
      Sorry i missed your reply, but here i am, your friend from the netherlands :)

      i bought it through alibaba from these guys: http://uis-carbon.en.alibaba.com/ But there is a big chance all of these bikes come from 1 factor. These are just resellers. On paper different companies.

      btw, also in holland things changed. I think i was lucky with the tax. a friend of mine ordered a ``chinarello`` last month, and got a letter from the customs, that he had to prove what the value of the package was. Therefor he paid 26% on the 800 euro value. Still a bargain compared to a real ``dogma``..... I have not heard of this anti dumping % here, but i know in Belgium they have this same problem.

      Anyhow, good luck with make a dicision, about your own Dogma2. all i can say: Just do it, the US$ is low :)

      Delete
  10. Morning folks, many apologies .. I've been hibernating from the blogspot for a few weeks. Allow me to answer your questions as best I can:
    Kenny, the bike is doing well! Since building it, there has been no deterioration in any of the integral components. I've not ridden it as much as I rode my old Trek roadbike (when I purchased that) because I save it for better conditions. If you know anything about the UK and our weather the last 10 months, you'll understand that it's not been out for millions of miles. It has probably done over 1000 miles and feels great.
    It's still super firm and demonically fast; I would say that it makes me faster on the road. I tested it on a bumpy 20mile route in January. My best "ever" average speed was 20mph a couple of years ago. I'm not as light or as fit as I was back then. Even so, I managed an average of 20mph in the cold. I have to say that the addition of my Garmin Edge 500 also helped me regulate my output a little better but the bike is quick.
    One problem I did have, and I probably have myself to blame ... is the front brake/headset setup. I've been through x3 headsets trying to pull the front end together so that the brakes don't vibrate.
    I ended up buying the very reasonable http://www.planet-x-bikes.co.uk/i/q/FSPXFBUMK2/planet_x_carbon_steerer_fork_bung_mk_2
    This bung, when tightened eradicates the problem for a while, but it comes back. Whilst typing this I've realised I should probably put some chalk down there to aid the grip. I have to say, I think this is down to carbon not gripping rather than any intrinsic issue with the frame build.
    I love the bike, it's everything I hoped a carbon would be. Can't recommend it enough.
    Hey Santi, adding to the post from anonymous .... I didn't receive any custom tax for this frame. I've heard it mentioned that it is a possibility, but in the uk I don't think it happens with these deliveries.
    I have paid a small fortune in the past for deliveries from the US (my garmin edge 500) which really pissed me off. I can't give you a definitive answer, but I know that neither myself or Steve have been stung with custom tax with these frames.

    ReplyDelete
  11. Hi

    I would like to know how much weighs the bike fully loaded ?

    thanks

    ReplyDelete
  12. I second that question!^

    ReplyDelete
  13. I have to say that I've not weighed it! I know, seems a bit odd after spending a fortune building it. I can say that it's lighter than both the Titanium "Van Nicholas" frame and carbon forks belonging to my mate. It's also lighter than my brothers Trek which has carbon rear stays and carbon forks, carbon handle bars and carbon seat post.
    The remarkable thing about it, and the feature both Neil and my brother noted when they had a go, is how quick it is. The bike puts everything from the pedals onto the road. There doesn't seem to be any loss of power whatsoever.
    I've just finished riding the Wiggle Dragon Ride with those two and we did great. The bike performed admirably over 210km of Welsh mountains.
    Rob and I were photographed at the top of Rhigos Mountain which can be viewed here..
    http://humanrace.co.uk/news/race-reports/item/446-sun-shines-as-wiggle-dragon-ride-celebrates-a-decade
    Brilliant day, incredibly rewarding.
    But no, I don't know the weight :)

    ReplyDelete
  14. Hi Rich,

    Just read all this and I am deffinatley going to do this once I come back from my holiday in Iceland.

    How long did your frame take to arrive from the date of ordering?

    ReplyDelete
    Replies
    1. Hi Dave, it took less than two weeks. It was certainly the slowest thing to arrive, then the group set from Germany.
      Ahh now I think about it, wiggle took ages on the seat post, so frustrating when you're ready with everything else!

      Delete
  15. Hi, I was wondering how has Steve's frame been holding up till now? I'm considering buying the same model from Flyxii but am still wary of its reliability. Would love to hear his opinions on that frame.

    ReplyDelete
    Replies
    1. Hi Adrian, it's served many miles perfectly well. I'll ask Steve to come in with a more detailed reply, but certainly no issues

      Delete
    2. Sry Adrin, spell check changed that!

      Delete
  16. Superb write up and definitely given me the go ahead to get moving with a frame purchase, I've been scanning the forums lately and velo build seem to help with the frame purchase (just incase anyone is struggling with spec) keep up the riding and the blog. Russ Cov

    ReplyDelete
  17. Nice and very helpful information i have got from your post. Even your whole blog is full of interesting information which is the great sign of a great blogger.

    HP - ENVY TouchSmart Sleekbook 15.6" Touch-Screen Laptop - 8GB Memory - 750GB Hard Drive - Silver

    HP - ENVY Sleekbook 15.6" Laptop - 6GB Memory - 750GB Hard Drive - Modern Silver

    ReplyDelete
    Replies
    1. Thanks Brandon, I appreciate the feedback :)

      Delete
  18. This comment has been removed by the author.

    ReplyDelete
  19. I built my own bike with Dura Ace Groupset from the UK and Chinese frame and wheels. Its the same as your mate Steves frame and great combination for either Triathlon with Tri Bars or just a good old Sportive or two. I think its brilliant but my local bike shop are never too impressed. I do feel sorry for them because the margins on branded bikes are around 32%. However I do go to them to get it serviced etc so at least they are still getting my business. I learnt the lessons about carbon paste etc. You do need that stuff to stop the seat post dropping or bars from spinining under pressure. Oh I did make the mistake of buying a carbon fibre saddle. Don't do this they are far too hard!! Its not worth the weight saving. So anyway I figure I have ended up with a £4,000 to £5,000 bike for about £1,800 (without pedals). Really pleased with it. Note my local bike shop keep on worrying about the frame cracking but I was walking around their store the other day and found a top range Works Specialized waiting to have it carbon fibre frame repaired (lucky we live near one of the F1 teams). So even the best frames can break. I wouldn't worry about importing one from China because they are so cheap even if it does break (and you survive) its still going to be cheaper to buy another couple as spares compared to buying a single branded frame.

    ReplyDelete
  20. Where did my comment go?? I entered a comment just now but can't see it here.....

    ReplyDelete
  21. In short, awesome article m8!
    I take this info is still accurate? (regarding buying frames or complete bikes from China)
    Would anyone even recommend buying a complete bike from far overseas or should I order the parts?

    ReplyDelete
  22. Just wondering where you got this from and what is your mates bike- great article btw

    ReplyDelete
  23. I enjoyed reading your article! Nice. :)

    ReplyDelete
  24. Hello Saw your 'opening the box' video on youtube
    A friend of mine bought a fake Team Sky Pinarello in matte black and Sky blue. He took it to DeVer cycles, Maurice Burton looked at it with a fine tooth comb and just couldn't find fault with it. My eyes popped out last week when he showed me, and I have a very good eye for what looks great or crap. My Chinese carbon 88mm/60mm wheels with Novatec hubs on my Dolan fixed are still true to form, and first class.
    I wouldn't buy a fake branded frame, I know my Bianchi C2C is the real deal, and that is reassuring when I hit those little ruts and potholes. I am happy buying carbon unbranded Chinese wheels, as from my experiences their wheels are almost as good as the branded ones, ie Mavic Easton, Fast Forward etc. My 'genuine' Mavic Carbone SLs really are the best of the best, but my Chinese carbons are a real close second

    ReplyDelete
  25. HI,
    every friends,
    I'm kenki, just from china, Looks many friends interesting the chinese carbon fiber frames,What about china latest carbon frames manufacturing tech,quality,etc,Look at this you'll understand.
    http://www.boostbicycle.com/article-54-Boostbicycle's-leading-production-technology.html

    ReplyDelete
  26. A very good and informative article indeed. It helps me a lot to enhance my knowledge, I really like the way the writer presented his views.
    carbon wheels

    ReplyDelete
  27. This comment has been removed by the author.

    ReplyDelete
  28. For you all "European friends" :) the anti dumping of 48.5% only applies if you get your frame painted.

    If you leave it raw carbon matte(make it painted local, if you like), it falls under the TARIC 8714 9110 89
    Insure the seller indicate this on the label or somewhere, or clearly tell it to customs if you talk with them.

    If you order carbon wheels, just order the rims.
    And lace them local.
    Wheels that are laced, can get the 48.5% too.

    After 4 months of a burlesque fight, I got my money back.

    ReplyDelete
  29. Well, I think there are a good idea about Carbon bike wheels. There are a good tropic to racing Cycle. I like it very much. Thanks for great sharing.

    ReplyDelete
  30. dear friends,
    it is william who is the carbon bicycle manufactorer from china , i have many bicycle part as below.
    bmc, pinarello dogma 65.1/f8/tt , specialized venge/SL4/SL5, cervelo s5/ s3, scott road frame/mtb frame, wilter frame, colnago c59/c60, BH, derosa frame, cipillion bond frame,and look 685/795/986 frame etc.. if you are interested to it, you can contact to me, my email is cycling88895@hotmail.com

    ReplyDelete
  31. I'm very much excited to discovered your blog. Your blog is extremely brilliant with your informative post and quality content.

    kimera

    ReplyDelete
  32. This information is superbly attractive that I couldn’t resist commenting
    Jimmy Kevin

    ReplyDelete
  33. One little problem with your vision of Christmas morning and shiny new bicycles. The average American has no idea how to repair yet alone reassemble their (or their kids) bicycles.
    I am sure these bikes falling apart under these kids as they attempt to ride them Christmas morning will bring much joy to both them and their parents. Not to mention the elation they will feel at the LBS when they find out how much it will cost to rebuild them. Only after the the tech has reminded them what a foolish purchase they made in the first place.
    Having said that. After getting my first good look at the 29er Beach Cruiser... All I can say is Wow! That really is one Bad A$$ looking bike! I completely understand why you purchased it. As to how long it will last, I think that remains to be seen. Maybe you could keep a journal "for say two years" about you wally bike experience.
    Great post as always. Cheers

    ReplyDelete
  34. Yes, great article. Loved how you incorporated attributes about the product into a real life story. I too recently finally pulled the trigger on a Chinese carbon build after some research as to its reliability. What i mostly found was the ones who actually bought and used the product, posted videos with usage data, where as the negative ones were almost always a story about someone having a bad experience. I opted for the Chinese generic because, as a family man who works for a living, it is realistically the only way i can justify buying a carbon bike. I have say so far so good. it is definitely light and zippy and I even went as far as buying the carbon saddle (though the jury is out on comfort during longer rides). The only issue i have is becoming a weight weenie. When I had it weighed with a computer, heavy pedals and cages, it was 16.8lbs. I've since switched to crank brothers eggbeater pedals but have not re-weighed it since. My older aluminum bike weighed 23.6lbs. My total cost was around 1,500 US.

    ReplyDelete
  35. This comment has been removed by the author.

    ReplyDelete

  36. It is nice and useful piece of info. Please keep us informing like this. Thank you for sharing this.

    Buy from China

    ReplyDelete
  37. All the great stuff are now providing by china. Thanks for such a great blog article, this is really helpful. Please keep sharing great information.

    Fabriquer En Chine | Importer De Chine

    ReplyDelete
  38. Very nice and helpful information has been given in this article. I like the way you explain the things. Keep posting. Thanks..
    carbon fiber bike parts

    ReplyDelete
  39. This post is so informative and makes a very nice image on the topic in my mind. It is the first time I visit your blog, but I was extremely impressed. Keep posting as I am gonna come to read it everyday!bicycle wheels ebay

    ReplyDelete
  40. Thanks for sharing the information. That’s an awesome article you posted. I found the post very useful as well as interesting. I will come back to read some more.carbon bicycle wheels

    ReplyDelete
  41. I am very much pleased with the contents you have mentioned. I wanted to thank you for this great article. I enjoyed every little bit part of it and I will be waiting for the new updates.carbon bike frame

    ReplyDelete
  42. That's really a marvelous post. This post contains useful information which helps us a lot. I have never seen such a great post. Your wonderful post can inspire a lot and helps us. I visit your website often and share with my friend.
    carbon cycling wheels

    ReplyDelete
  43. Thanks for sharing such informative blog article with us which is very useful as user point of view. Thanks for sharing it.


    Buy from China|Manufacturing in China | Transportation in China

    ReplyDelete
  44. These are truly amongst the wonderful informative blogs.Thanks for sharing such informative blog article with us.

    Transport En Chine | Import Export

    ReplyDelete
  45. Useful information shared. I am very happy to read this article. Thanks for giving us nice info. Fantastic walk through. I appreciate this post.
    carbon fiber bike parts

    ReplyDelete
  46. I'm considering buying a Flyii carbon fiber frame and fork. I planned to get a road bike with disc brakes, but according to Ebay sellers only 23mm tires will fit. I like to run 25mm tires as I feel they handle better on steep descents which we have an abundance here in Santa Cruz County, California. I figure I'll just order a cyclocross frame and build that up. I see that the frame has ports for internal cable housing, I wonder if there are plastic tubes in the frame for guiding the housings through.

    ReplyDelete
  47. Very informative article. Just took the plunge myself on chinese carbon frame. Colnago c59 to be exact. So very skeptical. I haven't recieved it yet, but have been quite a bit of research before and after the purchase. Hows your machine still holding up? Any major issues. Please let me know as my apprehensions are getting the best of me. Like most, hard working Dad, but love cycling, just cant afford the real expensive stuff. Please share your thoughts.

    ReplyDelete
  48. One of the best post i have ever seen,
    .i really like it,
    carbon fiber products

    ReplyDelete
  49. hi..
    just wanna ask how's the CCCF now? planning to buy bxt from china, been using other chinese products and so far so good, im on avanti carbon cadent ER 2 now, but frame is too big i need 49cm..

    hope to hear from you

    ReplyDelete
  50. This is the best blog i have ever seen.It has a Nice packages about road bikes and the details about bikes are good.


    specialized road bikes

    ReplyDelete
  51. Thanks for sharing the information. That’s an awesome article you posted. I found the post very useful as well as interesting. I will come back to read some more.



    specialized bikes

    ReplyDelete
  52. Thanks for sharing your info. I really appreciate your efforts and I will be waiting for your further write ups thanks once again.

    Turn Signal Gloves for Cycling

    ReplyDelete
  53. Just finished a build of a flyxii frame and forks; wondering how yours is going? And thanks for the detail and the humour.

    ReplyDelete
  54. i only use the bike discount website for mmy carbon frames.

    ReplyDelete
  55. Thanks for this blog. provided great information. All the details are explained clearly with the great explanation. Thanks for this wonderful blog. Step by step processes execution are given clearly.Know the details about different thing.
    wiggle bicycle accessories

    ReplyDelete